Manual and Examples
|
These files were included in the USB drive distributed in the workshop.
|
| ||
NICON: Network Interface for Controllers
|
NICON: Compatible with LabView 2013 or later. Current version uses NI USB-6218 BNC. Other NI DAQ module should be easily used. For presentation slide, please click the link below.
Giotis, G. "Substructure Module 1 - NICON: Network Interface for Controllers" |
| ||
S-Frame: General purpose analysis-design tool which is compatible with UT-SIM Framework
You can download S-Frame from the following link:
SetupSFrame11 (U of T)(Apr 11).exe
The above file was updated right after workshop, and does not require patching the main solver. License activation file was distributed in the USB key.
SetupSFrame11 (U of T)(Apr 11).exe
The above file was updated right after workshop, and does not require patching the main solver. License activation file was distributed in the USB key.
VecTor Program Suite, FormWorks, and Augustus
The programs can be downloaded from Prof. Vecchio's research website.
Presentation Slides
Introduction
Substructure Modules
Integration Modules
Presentations by Attendees
- Kwon, O. "Background and overview of the UT-SIM framework"
- Vecchio, F. "Theoretical basis of VecTor program suite"
- Bentz, E. "Collapse simulation of RC structures using Augustus "
Substructure Modules
- Huang, X. "UTNP and model integration method"
- Giotis, G. "Substructure Module 1 - NICON: Network Interface for Controllers"
- Sadeghian, V. "Substructure Module 2 - VecTor2"
- Huang, X. "Substructure Module 3 - OpenSEES, Matlab, and C++"
- Wang, X. "Substructure Module 4 - ABAQUS"
Integration Modules
- Mortazavi, P. "Integration Module 1 - OpenSees"
- Huang, X. "Integration Module 2 - S-Frame"
- Wang, X. "Integration Module 3 - Abaqus"
- Giotis, G. "Hybrid simulation demonstration with instructional equipment"
Presentations by Attendees
- Prof. Tremblay, “Multidirectional Seismic Testing of Steel Braced Frame Columns at Polytechnique Montreal”
- Joshua Woods, “Hybrid Simulation Projects at Carleton University”
- Prof. Luigi di Sarno, “Seismic Assessment and Retrofitting of Bridges”
- Dr. Lanese, “EUCENTRE TREES Lab Hybrid Simulation of Seismically Isolated Structures”
- Dr. Zeng “Seismic Response Analysis of an Interacting Train-Bridge System considering Derailment”
- Prof. Sextos “Hybrid testing for assessing the seismic response of natural gas pipelines and preliminary tests to quantify the soil-pipe system stiffness”
- Saeid Mojiri “Hybrid Simulation of a BRB Frame with UT-10 Hybrid Simulator”
- George Giotis “Weakly-coupled Hybrid Simulation of a RC Column”
- Xuguang Wang “Hybrid Simulation of a Steel Frame Subjected to Thermal load”